Flat Cut Metal Letters Mounting Options

Plain Stud Stud with Nuts Stud with Spacers
Plain installation method will leave the back of your letter completely flat. To use this method, apply 100% silicone to the back of the letter and secure the letter to the wall. Use masking tape on the face of the letter to hold it to the wall while the silicone dries. Most popular and secure mounting method. Drill holes in installation pattern (recommended), fill with 100% pure silicone and slide in letters. Stud for brick option is available for standard brick with mortar joints at 2 5/8'' on center. Stud mount inline will place all the studs in even rows for rail mounting. Stud mount with nuts can be used in many ways. If you can access the wall behind the letters, you can use the nuts behind the wall to secure the letters. Also, if you have a corrugated building you can use the nuts on the studs to stand the letters off the wall in the low spots. Stud mount with spacers will allow the letters to standoff the wall surface either 1/4'', 1/2'' or 3/4'' using sleeves that slide over the stud.