GeminiLettersDirect.com

Laminate Foam Letters Standard Mountings

Plain Mount Stud Mount Pad Mount
1a - Plain 2a - Stud 2b - Pad
Plain letters are shipped without any mounting hardware. Studs are metal threaded posts on the rear of the letters.  Specify if studs need to be in line for brick or block wall mortar joints.  When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center) Pads are plastic disks on the rear of the letters.  Adjustable or flush pads available upon request.
     
Combination Mount Combination All Mount Double Sided Tape Mount
2c - Combination 2d - Combination All Double Sided Tape
Combination has pads at the bottom and studs through pads at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
Combination All has studs through pads on all mounts.  Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
Strips of 3M-VHB tape are placed strategically on the back of the letter. Follow 3M recommendations for use. Not suitable for all mounting surfaces.
     
Flush Stud Mounting Gemini recommends mounting foam letters with
studs or construction grade adhesive
Flush-Stud
Letters/logos 3/8" and thicker can be drilled and tapped to receive studs. Studs are metal threaded posts on the rear of the letters.  Specify if studs need to be in line for brick or block wall mortar joints.  When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters.  (Brick: 2-5/8" on center; Block: 8" on center)