Gemini ACRYLIC LAMINATE on FOAM Display Sign Letters
- Product Code: ACR-LAM-FM
- Production: Made to Order in 4 - 6 business days from art approval
Letters with no mounting hardware, Display Letters can be attached to mounting surface with a combination of adhesive or double-faced tape – applied by installer – based on surface and letter weight.
Stud blocks are solvent bonded to letter backs to receive a 10-24 stud. These blocks will require the letters to stand-off the mounting surface approximately 3/8" - 1/2". Drilling patterns are required for this installation.
Thicker letters (min. 1/4" stroke) can be drilled and tapped for stud installation. Specify if studs need to be in line for brick / block mortar joints or rails.
Pads are plastic disks on the rear of the letters. Secure the letters to the wall using a split stencil pattern or spacing tape guide and silicone adhesive.
Combination of studs and pads. Stud through a pad on the top portion of each letter, pads only on the bottom portion of each letter. Mounting procedure is the same as a Stud Mount with the addition of securing pads to the mounting surface with adhesive. Studs can be aligned in-line for brick or block mortar upon request.
Combination all mounts have stud through a pad on the top and bottom portion of each letter. Mounting procedure is the same as a Stud Mount. Studs can be aligned in-line for brick or block mortar upon request. Drilling patterns are required for this installation.
DOUBLE FACED TAPE MOUNT:
Double face tape mount comes with either partial or fully covered backs with a VHB, double faced tape. Volume of tape is based on letter size and gauge. Heavier letters may require tape and adhesive (such as epoxy on acrylic) to properly secure letters. VHB tape is designed for interior, flat, dry wall installations.
No Installation Pattern Required:
Installation patterns are highly recommended. Patterns can not be produced once order is shipped.
A visual reference guide, typically used for pad mounted letters. The letters in a specific copy are spelled out and properly spaced on a long pattern table or computer generated. A narrow (approximately 2") piece of paper contains hash marks or plotted lower portions of the letters. Guide is secured to the wall with tape, by the installer, and provides a visual guide for installing letters.
Rigid Stencil Guide:
A computer generated, full size cutout, designed for smaller letters, logos or bars. Typically used to install double face tape letters. Guide is taped to wall, letters are set inside cutout and adhered to wall. In some cases where this method will not work a rigid split stencil will be provided instead. Rigid split stencils is a computer generated, partial cutout of bottom portion of the letters above the baseline, plus 2" below the baseline that provides a perfect way to install plain, pad or double face tape flat cut out letters. This split stencil is produced using the same file we use to produce your letters. Gemini layout team will determine if Stencil or Split Stencil is best for your order.
Stud Mount Drill Pattern:
Computer generated tracing of letters with hand punched hole locations of studs, printed on 60# white grid paper. Once taped to wall, hole locations are then drilled and filled with adhesive.
Gemini Acrylic Laminate on Foam Display Sign Letters
Indoor Use Only
Gemini uses 1/8" extruded acrylic sheets that are laminated onto Gemini's rigid high density foam (12 lb./cubic foot) with a 0.030" ABS backer. The proprietary Bern-Lok lamination process is used to adhere the acrylic laminate to the foam substrate using a combination of heat, high pressure and chemical bonding. Once laminated the sheets are CNC precision cut.
- Sizes range from 4" - 24" in height depending on thickness. Contact us for larger sizes.
- 6 Standard thicknesses - 1/2", 3/4", 1.0", 1.5", 2.0" and 3.0"
- Precision CNC router cut
- Easy to install
- 12 Standard acrylic laminate face colors
- Natural foam color is charcoal grey.
- Edges can be painted with our standard paint colors or your custom color match.
- Lifetime Manufacturer Guarantee Click for Details
How To Order:
# Installation Patterns Can't Be Produced Once Product Has Been Shipped
Do You Have a Custom Project? Contact Us for a Quote
Submit artwork with the following information:
- Vector based art is required
- Size of the finished logo or letters
- PMS colors, standard painted or pigmented colors
- Material type / thickness
- Mounting method
WHY CHOOSE GEMINI SIGN LETTERS and PLAQUES?
Gemini guarantees all of its plastic, acrylic, metal letters and plaques for life.
Gemini can offer the lowest prices
Fast order production and shipping
Gemini is fully immersed in green manufacturing